G&G Blog

You are here:

Home / Support and Service / G&G Blog

How to Solve the Problem of Wrong Printing Margins

2020-07-17
556

1594959506129783.jpg

Have you ever suffered from the problems that your printed pages with wrong margins as shown below:

2020-07-15_001.jpg   2020-07-02_001.jpg
                     Wrong Margin                                                              Normal

After double check the typesetting on Word/PDF, it’s found that everything is normal. Is there anything wrong with my printer?
Don’t’ worry, actually the truth is hidden in the papers! G&G Print Lab will tell you 3 steps to put it in order.


Step 1: Check the paper setting on printer

This is essential because the printer must precisely recognize the size of paper you’re printing. We can reach “Tray size” control menu on printer’s control board. General operation paths:

 

“Main Menu” → “Trays” → “Tray X size” (depends on which tray we use)

1.jpg2.jpg

And select the right tray size according to the paper we use.

3.jpg

Step 2: Adjust the tray

Incorrect position of paper placement on the tray may cause the problem while transporting the paper which will result in wrong printing margins.


Firstly, open the tray

4.jpg

We may find that there lies gap between the paper and tray.

5.jpg

Then, we can adjust the width and length of the tray manually and make it closer.

6.jpg

And close the tray.

7.jpg

Step 3: Check the paper setting on computer before printing

Similar to the step 1, it’s important to give correct order to printer’s brain so that it could provide satisfied output.

 

So we must be careful about the setting on computer.

Setting.jpg

Confirm if the paper size is consistent with the paper we use.

Paper size.jpg

Now we can press the “Print” button to have a try.

If the problem has not been solved yet, please contact the G&G technical support via email: info@ggimage.com.



CONTACT US

Questions or suggestions? We’d love to hear from you.